It can be seen from the above points that the importance of professional technology to equipment. An excellent thermoforming packaging machine needs a professional manufacturer and professional technology to realize it, and give customers more production guarantee.
10-13
The surface of the all-aluminium furniture is made of environmentally friendly materials, which do not contain any paint components, and the environmental protection level is E0. The decorated indoor environment has no peculiar smell, and completely bid farewell to the troubles caused by decoration pollution. To know the decoration materials
10-13
Turning cnc lathe spindle parts have high precision, strong rigidity, and requirements for thermal deformation. Because there is no need to manually adjust during the machining process, the accuracy and rigidity requirements are to avoid affecting the machining quality. There are three main turning cnc lathe spindles on the market.
10-13
Infrared-distance-meter has the advantages of high degree of automation, fast ranging speed and high precision. However, if the instrument is used improperly or poorly maintained, the instrument performance may change early, resulting in a decrease in accuracy.
10-13
The mainstream USB specification is version 3.0, and its agreement has strict regulations on the shape, size, wire, color, identifier, and electrical characteristics of the connecting cable. Therefore, if we want to do a good job in the connection of usb c cable, we must understand the cable. So do you know what the four lines of usb c cable are?
10-13
Before installing the air core inductor coil, perform a visual inspection. Before use, check whether the structure of the coil is firm, whether the coil is loose or loose, whether the lead contact is loose, whether the magnetic core rotates flexibly, and whether there is a slider Wait. After all these aspects have been checked and passed, the installation can be carried out.
10-13
Low pressure injection molding (LPM) is different from traditional injection molding. Low pressure injection molding is where parts are molded under lower pressure, allowing gentle packaging of precision electronic components.
10-13
During the 3D printing process of parts, very small cavities inside will form pores. These micro-holes will reduce the overall density of the part, leading to cracks and fatigue problems. It can adopt the mode of laser partition scanning and can also reduce the amount of pores. Reduce powder splash by adjusting the shape of the spot.
10-13
Pay attention to the following points during operation of the gas boiler:The boiler does not allow positive pressure combustion or smoke emission from the furnace, because it is easy to burn out the coal filling hole cover.
10-13
From the analysis of several aspects such as the connection of the plate bending machine, the stress status, and the process of the plate bending machine, it can be seen that the single-sided radial clamping has the following advantages:
10-13
